This room features a remote ceiling camera connected to the PC for lecture capture. It is controlled from the touch panel or a remote control.
The camera will shut down after a couple of hours.
To ensure this doesn’t happen when you make a recording, you need to perform the following steps at the start of your lecture:
If you see colour bars in the Panopto recorder
This means the camera is switched off. Turn the camera ON by pressing the POWER button [a]
If you don’t want to record the camera, you will need to deselect it in the Panopto recorder, otherwise your recorded session will contain the colour bars.
If you see the image from the camera
Press CAMERA SELECT 1 [b] – this will prevent the camera from powering off during your lecture.